L'OLED 65" ce l'ho già in sala, non ha senso metterne un altro un piano più sotto :|
Printable View
Alla fine ho preso lo schermo con gain 0.8 e CLR (sostanzialmente riflette quasi solo la luce che viene dal basso) direttamente dai cinesi va Alibaba, consigliato su molti forum.
Però son qua che mi cago in mano non sapendo se arriverà davvero e, se si, in che condizioni :sneer:
Preso anche Sonos Arc + i due Sonos One SL con stand per il surround, il subwoofer aspetto di vedere quanto rumore esce da quella stanza post-insonorizzazione amatoriale :look:
Io sto valutando di vendere parte dell'impianto (centrale e due diffusori) e prendere 5* https://www.focal.com/en/custom-inte...rs/on-wall-301
Sto ristrutturando casa e quei diffusori fanno a botte col resto... quindi pensavo di farmi un impianto 2 canali nello studio col giradischi, e un impianto HT (da decidere se con o senza subwoofer) nel salone.
Io uno degli One lo ho sulla mensolina sua a parete, costa quando un terzo One, ma è carinissima :nod:
Ecco questi esteticamente mi piacciono un botto, peccato che qua costino 1100 CHF l'uno, quindi per farne 5 partono 5500 CHF :sneer:
Più il woofer e il sinto.
Vediamo comunque, non ho ignorato il tuo consiglio, sono conscio che hai ragione.
Però vediamo prima come va col Sonos, se mi scopro audiofilo faccio sempre in tempo a prendere qualcosa così e usare il Sonos in sala
Io sono andato sul semplice e ho preso questa coppia: https://www.digitec.ch/it/s1/product...upplier=406802
Che è anche liinkta sul sito Sonos come "ufficiale".
Quelli invece veramente fatti da Sonos costano 250 la coppia e non sono neanche un granché esteticamente, boh
Vabbè ma ho già comprato tutto e sono in linea con il preventivo che mi ero fatto da solo, l'unica eccezione è che lo schermo mi è costato un 50% in più (grazie ad Alibaba, altrimenti sarebbe stato il 120% lol).
L'unica cosa che rimane pending è uno splitter tipo l'HDFury Arcana per dividere il segnale audio da quello video, ma non dovrebbe essere necessario visto che il proiettore ha una presa HDMI ARC.
Se tutto va bene, Shield -> Proiettore -> Sonos (via HDMI ARC)
Ma anche questo è in preventivo (come opzionale :nod: )
comunque io compro un sacco di troiate da aliexpress e funzia da dio, solo preparati ad aspettare 1-2 mesi
Spedito stamattina via FedEx, arrivo stimato venerdì prossimo.
Al 99.999% però faranno qualche tipo di storia alla dogana svizzera, quindi mii sa che si va alla settimana dopo.
Non è un problem tanto non ho il trapano a percussione (e comunque non sono capace di usarlo), quindi devo comunque aspettare che passi qualcuno di qua per appendere lo schermo al muro :sneer:
Idem per l'Arc, ho preso il wall mount originale Sonos ma mi serve qualcuno che me lo monti :sneer:
Bah pure li sono passato da un telo da circa 500€ ad uno da 100€ l'unica differenza che ho notato è il tempo che ci mettere a scendere quello piu' economico è un po' piu' lento...
Ripeto io investirei soprattutto nell'audio perchè un audio che si sente male con le voci troppo basse o non chiaro ti fa sclerare il resto alla fine ci si abitua quindi sicuramente non andare su un proiettore di fascia bassa ma basta uno con una luminosità decente ed hai fatto il 90% dell'esperienza di visione :D
La dogana è veloce, la parte più lunga è la spedizione iniziale e il pezzo Europa-svizzera perché spedisco in aeroporti di merda.
Il trapano prendilo, io ero come te ma col trapano giusto è facilissimo fare sti lavori. Ora metto mensole come se non ci fosse un domani, anche se ho tutti i muri in cemento armato :sneer:
No ma il mio è fisso, non a motore. Il costo aggiuntivo viene dal due fattori:
1) gain factor 0.8, ergo riflette meno luce di quanta ne riceve il che dovrebbe dare un boost ai neri e al contrasto (tutto teorico e basato su conoscenza random fatta su internet, non sono un esperto)
2) soprattutto, è CLR, cioè non è un tessuto "liscio" ma è fatto in modo da riflettere solo la luce che riceve dal basso (ignorando il 93% della luce che arriva da altre direzioni).
Serve principalmente per stanze dove non puoi controllare la luminosità (aka se hai finestre), ma i proiettori UST fanno tanta luce in giro e pare che il riflesso sul soffitto / muri rischi di slavare l'immagine. Con sta tecnologia non succede. Vedremo, oramai è fatta e il telo è già in cammino (oddio, è ancora in cina che aspetta l'aereo :sneer: ).
Riguardo all'audio, non cambiarmi idea così, avevi detto che un sistema random bose andava bene è_é
Ho preso il Sonos Arc (soundbar) più due Sonos One SL come speaker posteriori, per un uso consumer dovrebbero andare bene. Spero.
Come proiettore ho preso l'Optoma P2 che fa 3000 lumen dichiarati.
Se poi ti vai a vedere le rilevazioni fatte nelle review però ne fa meno nella realtà.
1800 in modalità cinema, circa 2000 in modalità game, 2800 in modalità bright ma poi l'immagine tende un sacco verso il blu.
Ho fatto i conti, includendo ovviamente anche il gain factor e dimensione dello schermo, per vedere quanti foot-lambert dovrei avere ed esce al punto giusto.
Però anche lì boh, finchè non lo vedo in azione non so come andrà a finire lol
I salti tra i vari aeroporti se li smazza FedEx e se hanno pianificato l'arrivo per venerdì dovrebbe essere coperto, in teoria.
Però la dogana svizzera non la puoi stimare, dìpende anche da come gli gira.
Il trapano boh, mi fido davvero poco di me stesso su ste cose.
E poi voglio qualcosa fatto in maniera decente - leggasi, che non sia palesemente storto.
Di conseguenza, meglio se non mi ci metto :sneer:
Schermo arrivato con 3 giorni d'anticipo, ho paura ad aprire la scatola per, in ordine sparso:
- qualche nuova variante di Covid che arriva dalla Cina
- scoprire che il prodotto è rotto
- scoprire che il prodotto non è quello giusto
- scoprire che il prodotto è difettoso
:afraid:
O tutte le cose insieme :nod: