Results 1 to 5 of 5

Thread: Help Scheda Audio

  1. #1
    Axelfolie's Avatar
    Join Date
    Jan 2004
    Location
    Treviglio
    Posts
    4.048

    Default Help Scheda Audio

    Premessa: ho googlato un pò qua e la ma tutto ciò che ho letto non è servito a farmi chiarezza.

    Config Attuale: Scheda audio integrata sulla mobo (P5Q-Deluxe), casse logitech z-5500.
    Al momento le casse sono collegate alla scheda audio tramite uscita spdif digitale ed è il pod delle z-5500 a decodificare il segnale in dolby digital, dts, etc: in pratica questa uscita "bypassa" la scheda audio e lascia fare tutto il lavoro di decodifica al pod... e fino a qua tutto ok.

    Ieri mi capita tra le mani una Sound Blaster X-FI Xtremegamer Fatal1ty Pro, sicuramente superiore alla scheda audio integrata, e subito noto l'assenza dell'uscita digitale (se non tramite modulo digital i/o acquistabile separatamente).
    Quello che mi chiedevo è: tale scheda è in grado di decodificare i segnali dolby digital, dts, etc. come, se non meglio, del pod delle z-5500? Secondo voi è un upgrade sensato da fare? L'utilizzo che ne faccio è principalmente film .mkv e giochi.

    Spero di essere stato chiaro,
    saluti, Axel

  2. #2
    Lieutenant Brcondor's Avatar
    Join Date
    Mar 2005
    Posts
    4.610

    Default

    Se tu usi un'uscita digitale vuol dire che bypassi il dac del pc per usare il dac dei tuoi diffusori. Tu conta che il tuo set(che mi pare costi meno di 200) ha dentro sia un dac che un amplificatore. Se acquisti una cheda audio(mi pare che quella ctata da te venga poco meno di 100 €) compro un oggetto dedicato che esegue sia la decodifica che la conversione in analogico del segnale. Il vantaggio sarebbe indubbio. Può essere che visto il basso livello dei diffusori magari neanche te ne accorgi(ma io penso il contrario), ma sulla carta è un grande upgrade
    " ...e mai un pensiero non al denaro, non all'amore né al cielo... " Fabrizio de Andrè

  3. #3
    Axelfolie's Avatar
    Join Date
    Jan 2004
    Location
    Treviglio
    Posts
    4.048

    Default

    Miglior prezzo trovato in giro per i diffusori è 300€, per uno come me che non ha troppe pretese non sono affatto male :-P cmq felice di constatare che sia un buon upgrade; unico dubbio che mi rimane è se la scheda sia in grado di decodificare i segnali dd, dts, etc. e quindi offrire un buon effetto surround oppure sfrutti solo il cmss3d e mi sdoppi l'audio sulle casse posteriori: cosa che mi farebbe un pò schifo onestamente

    Axel

  4. #4
    Lieutenant Brcondor's Avatar
    Join Date
    Mar 2005
    Posts
    4.610

    Default

    Bah onestamente credo di si. Considera questo, tu non hai un set di diffusori da 300 euri ma un set di diffusori+ amplificazione+ dac a 300 euro. Ovvio che per uno senza pretese sono un buon inizio. Guarda le specifiche e vedi cosa veicola: tu conta che il collegamento ottico mi pare che non riesca a inviare determinate codifiche, mentr euno direttamente analogico si. Controlla bene tutti i collegamenti e se va tutto bene cambia scheda audio: la scheda audio incide in maniera marcata del suono, è il pezzo piu sensibile, è proprio il dac che ti da il suono. Pero puo anche essere, come ti ho detto, che i diffusori sono cosi modesti che non ti accorga di nulla.
    " ...e mai un pensiero non al denaro, non all'amore né al cielo... " Fabrizio de Andrè

  5. #5
    Axelfolie's Avatar
    Join Date
    Jan 2004
    Location
    Treviglio
    Posts
    4.048

    Default

    Non capendoci molto copio-incollo le specifiche:

    Creative Sound Blaster X-FI Xtreme Gamer Fatal1ty Pro Series:

    Technical Specifications
    24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
    24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output
    24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output
    16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
    ASIO 2.0 support at 16-bit/44.1kHz, 16-bit/48kHz, 24-bit/44.1kHz, 24-bit/48kHz and 24-bit/96kHz with direct monitoring
    Enhanced SoundFont support at up to 24-bit resolution
    64MB of X-RAM
    Audio Performance (Rated Output @ 2Vrms, Typical Value)

    Signal-to-Noise Ration (20kHz Low-pass filter, A-Weighted)
    Stereo Output 109dB
    Front and Rear Channels 109dB
    Center, Subwoofer and Side Channels 109dB
    Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter) = 0.004%
    Frequency Response (-3dB, 24-bit/96kHz input) 10Hz to 46kHz
    Frequency Response (-3dB, 24-bit/192kHz input) 10Hz to 88kHz (Stereo only)
    Connectivity

    Speaker and Headphone connections for stereo to 7.1 (Line Out via three 3.5mm mini jacks)
    Line In / Microphone In / Digital Out* / Digital I/O** (shared 3.5mm FlexiJack)
    Auxiliary Line level Input (via 4-pin Molex connector)
    I/O Console connector (for optional upgrade)
    * Digital Out supports stereo SPDIF out and pass through of multichannel DVD audio
    ** Digital I/O requires Sound Blaster Digital I/O Module (sold separately)


    Logitech Z-5500:

    Technical Details
    Main Specifications
    Product Description: Logitech Z 5500 Digital - PC multimedia home theatre speaker system
    Product Type: 5.1-channel PC multimedia home theatre speaker system
    System Components: Signal process unit, 5 speakers, subwoofer
    Speaker Type: Active
    Nominal Output Power (Total): 505 Watt
    Audio System Max Output Power: 1010 Watt
    Media Included Qty: 33 - 20000 Hz
    Audio Amplifier: Integrated
    Connectivity Technology: Wired
    Speaker System Details: 4 x satellite speaker - 62 Watt ¦ 1 x centre channel speaker - 69 Watt ¦ 1 x subwoofer - 188 Watt
    Built-in Decoders: Dolby Pro Logic II, DTS 96/24, Dolby Digital, DTS decoder
    Remote Control: Remote control - infrared
    Manufacturer Warranty: 2 years warranty
    Extended Specifications

    General
    Product Type: 5.1-channel PC multimedia home theatre speaker system
    Connections
    Connector Type: 1 x SPDIF input ( RCA phono ) ¦ 1 x SPDIF input ( TOS Link ) ¦ 1 x digital 5.1 channel audio line-in ( mini-phone stereo 3.5mm x 3 ) ¦ 1 x audio line-in ( mini-phone stereo 3.5 mm )
    Manufacturer Warranty
    Service & Support Details: Limited warranty - 2 years
    Service & Support: 2 years warranty
    Power
    Power Device: Power supply
    Speaker System
    Audio Amplifier: Integrated
    Built-in Decoders: Dolby Pro Logic II, DTS 96/24, Dolby Digital, DTS decoder
    Connectivity Technology: Wired
    Controls: Input selector, mute, power on/off, volume
    Detachable Grilles: Yes
    Max (RMS) Output Power (Total): 1010 Watt
    Media Included Qty: 33 - 20000 Hz
    Media Type: Signal process unit, 5 speakers, subwoofer
    Nominal Output Power (Total): 505 Watt
    Output Features: Bass Reflex
    Output Level (1m): 115 dB
    Signal-To-Noise Ratio: 93.5 dB
    Speaker Type: Active
    THX certified: Yes
    Speaker System Details
    Driver Details: Satellite speaker : 1 x full-range driver - 3"
    Speakers Included: 4 x satellite speaker - 62 Watt - wired ¦ 1 x centre channel speaker - 69 Watt - wired ¦ 1 x subwoofer - 188 Watt - wired


    Che dovrei vedere?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
[Output: 56.62 Kb. compressed to 48.54 Kb. by saving 8.08 Kb. (14.27%)]